Snap-on Motorized Loader Manuel d'utilisateur télécharger pdf (Page 12)

Safety Information

safety features

LIMITING SWITCHES

The limiting switches on the loading mechanism will automatically stop the motor

before damage is done to the loading mechanism. To restart the motor reverse the

direction of the load.

“ OVER TORQUE ” PROTECTION FOR TRANSDUCER IN USE

The motor will stop when the transducer in use has reached an “OVER RANGE”

condition. This protects the transducer from permanent damage.

INPUT WHEEL ENGAGE/DISENGAGE POSITION

The fine adjustment input wheel is to allow the operator to apply load in small

increments when testing DIAL indicating, DEFLECTING beam and ELECTRONIC

TORQUE wrench. When not in use it has a disengage feature to prevent injury to

the operator.

IT IS RECOMMENDED TO DISENGAGE INPUT WHEEL PRIOR TO ACTIVATING

THE MOTOR.

To disengage the input wheel, pull the wheel out until it is disengaged from the

loading mechanism. When disengaged, with the motor activated, the input wheel

will rotate slightly but will ridding free on the input shaft.

To engage the input wheel for use, press the “EMERGENCY STOP” button on the

control box to disengage the motor. Push the wheel in until it engages with the

input shaft.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 101 102

Pas de commentaire

Snap-on Motorized Loader Manuel d'utilisateur Page 12